Drizgas Tellerette packing materials are high efficiency plastic tower packing
designed for use in wet scrubber. Drizgas is the one of leading manufacturer of
Tellerete packing materials in India. This has more interstitial hold up points than
other packings and this has the effect of continuously generating fresh liquid
surface area which is the key for high mass transfer between gas and liquid phase.
Working principle of tellerette packing
In the scrubber column, the packing is filled and liquid is sprayed at the opposite
direction. First, the liquid is collected by inertial impaction to form countless
droplets. As each droplets falls on the next packing elements and burst, exposing
fresh surfaces to gas. This dispersal cycle repeats continuously.
Features of Tellerette packing
Lower HTU (Height of Transfer Unit) causes shorter packing height
Higher gas flow rate capacity which allows use of smaller diameter
Lower pressure drop to reduce operating cost
High column stability - No fouling on flooding
Effective mass transfer between gas and liquid
Available in MOC of PP, PVC, HDPE
Properties of Tellerette packing
Size (mm)
Loop Height (mm)
Void space (%)
Surface area (m²/m³)
Packing factor (/m)
50
20
87
180
36
75
25
93
125
18
100
50
96
72
9
Phone Number
+91 842 823 1593 | +91 995 287 7991
Email Address
sales@drizgas.com | info@drizgas.com
Office Address
No. 50, Villianur Main Road, Odiyampet, Puducherry - 605 110, INDIA